|
| Fluid Connectors |
 |
|
|
|
|
|
|
|
|
| SNOW MASTER - High Pressure Quick Couplings |
|
 |
|
|
| SNOW MASTER |
| High Pressure Quick Couplings |
|
| Special Coupling System “Kamlok” to be used on snow pump installations |
|
|
 |
|
|
|
|
|
|
| SNOW MASTER |
| Hose Connections |
|
| Optimized stem outlines for different hose assembly methods |
|
|
|
|
|
|
| SNOW MASTER |
| High Pressure Quick Couplings |
|
 |
High-Pressure type, coupling dimensions according to US-Mil-Norm (C-27487) resp. DIN 2828 |
|
Essentially stronger housing |
|
Handle securing with robust chain and safety clip |
|
Investment casted handle with high-pressure pins crimped on both sides |
|
TÜV-inspected for 60 bar working pressure (burst pressure test 150 bar) for liquids ** |
|
Special Coupling System to be used on snow pump installations, tunneling or different high-pressure applications with liquids |
|
|
Max. Working Pressure |
Material |
Mat. Handle |
Mat. Seal |
Medium |
Norm |
Threads |
Temperature |
|
PN 60 bar ** |
1.4401 |
1.4401 |
Perbunan |
liquids |
MIL/ DIN |
ISO 228 / DIN 2999 |
-40°C – +95°C |
1 |
|
|
|
|
| SNOW MASTER |
| High Pressure thread Couplings |
|
|
High-Pressure type, coupling dimensions according to US-Mil-Norm (C-27487) resp. DIN 2828 |
|
Essentially stronger housing |
|
Handle securing with robust chain and safety clip |
|
Investment casted handle with high-pressure pins crimped on both sides |
|
TÜV-inspected for 60 bar working pressure (burst pressure test 150 bar) for liquids ** |
|
Special Coupling System to be used on snow pump installations, tunneling or different high-pressure applications with liquids |
|
|
Max. Working Pressure |
Material |
Mat. Handle |
Mat. Seal |
Medium |
Norm |
Threads |
Temperature |
|
PN 60 bar ** |
1.4401 |
1.4401 |
Perbunan |
liquids |
MIL/ DIN |
ISO 228 / DIN 2999 |
-40°C – +95°C |
1 |
|
|
|
|
| SNOW MASTER |
| Drain Adaptor |
|
|
Drains the lines automatically when installation is switched off and pressure drops to avoid frost |
| |
damages. |
|
Simply assemble the adaptor at the lowest point between snow pump and hydrant and fix it with |
| |
two spears (60 cm long) in suitable position. |
|
|
 |
|
|
|
|
|
| SNOW MASTER |
| High Pressure Screwings |
|
|
Thread Stems for long-term steady installations of pipe and hose lines, extreme robust execution |
|
Female thread stems with swivelling nut, flat sealing with thread sealing ring |
|
Appropriate safety clamps and crimping sockets |
|
|
Max. Working Pressure |
Material |
Medium |
Thread |
Temperature |
|
PN 60 bar |
steel (zinc plated) |
liquids |
ISO 228/ DIN 2999 |
-40°C – +95°C |
1 |
|
|
|
|
