The little giant...

- adsorbs and regenerates at the same time
- vessel manufactured in one piece
- directly controlled main and exhaust valves
- compact non-return valve combination
- self-cleaning sieve screens on the wet side
- high quality desiccants
- including multitronic control system
- allows ZANDER 10 minute cycle

System supplement: ecodry KA-MT
- dryers and cleaners (K-MT has an integrated activated carbon stage) constitute a reliable purification unit
- besides drying, the compressed air is cleaned by the activated carbon stage

Due to our more than 30 years experience in purification of compressed air world wide, we are able to bult your ecodry KE- MT unit for a special application! Talk to us!

High end adsorption by means of vacuum regeneration

- savings of 25% are possible compared to conventional systems
- active heating under vacuum with ambient air
- intensive cooling
- no purge air, thus pressure build up on the wet side
- changeover without dew point peak
- standard pressure dew point -25° / -40°C
- option: reliable dew points down to -70°C
- new function alarm for pressure, temperature, heating, vacuum pump and vessel changeover
- standard-capacity of up to 14500 m³/h, higher capacities available on request
- system options:
- pressure dew point control,
- isolation (as an option)

Conventional system

- blower regeneration with external regeneration
- heating under pressure with atmospheric air in a reverse flow
- approx. 3.5% requirement of purge air after the cooling down for a stable pressure dew point
- pressure dew points -25° / -40°C
- function information
- system options: pressure dew point control, isolation
- special designs: in stainless steel as CO2 gas dryer for breweries and special gases

Oil vapour adsorbers (activated carbon adsorber) are filled with a special grade of activated carbon for the purification of compressed air and gases; as treatment against oil aerosols

- filled with highly active activated carbon
- flow through of the activated carbon form top to bottom
- oil vapour removal up to a residual content of up to 0.003 mg/m³
- oil indicator is installed by default and allows a continuous quality control
- carbon life of up to 10,000 hours
- flow 8 to 6100 m³/h

Add-on modules for cold regenerated dryers

- forms the complement to the series ecodry KEN-MT and K-MT (leads to the series KEA-MT and KA-MT)
- the combination of ecodry and the oil vapour adsorber provides dry, clean oil- and odour-free compressed air and gases

Multitronic control system, the brain for efficient compressed air drying:
- is a microprocessor control system for all ZANDER heatless dryer systems
- permits flexible adjustment of the drying times up to 240h
- features LED’s on the front side for the individual functions such as operation, adsorption and desorption
- selector switch I-0-2 for fixed cycle or variable cycle for synchronisation with the compressor

- leads to the efficient ZANDER 10 minute cycle:
-- 5 minutes adsorption
-- 4 minutes desorption
-- 1 minute pressure build-up

Condensate Drains:
automatic condensate drains, manual condensate drains, electronic condensate drains (see Condensate & waste water technology -> Electronic Condensate Drains)

Service Kit:
- several service kits provide the best solutions for the maintenance
- all other wearing parts are available in the requested quantities

Desiccant:
Despac available in user-friendly quantities

Molecular sieve:
1,7kg / 4,0kg / 15,0kg / 130,0kg

Ecosorp II:
1,7kg / 5,0kg / 18,0kg / 140,0kg

Diverse accessories:
- several preliminary and secondary filters
- control of the pressure dew point
- starting gear

Removes the humidity in your compressed air system!

- environment-friendly by using the ozone-preserving world wide available refrigerant R 407 C
- minimized refrigerant fill quantities – up to 65% less
- compact design (up to 30% smaller design & weight)
- lowest operating costs
- optimal security
- optimum pressure dew point above 0°C, thereby best quality of the compressed air
- capillary injection guarantees highest reliability
- full-size heat exchanger secures power reserves
- WET-X separator ensures reliable water separation
- arctic-star AS-K applicable up to a nominal flow of 180 m³/h
- arctic-star AS applicable from nominal flows of 245 to 10.800 m³/h

Pictures:
top: series arctic star AS-K
bottom: series arctic star AS

Optimal drying for small compressed air requirements

ZANDER membrane dryers for clean compressed air in a range of performance of up to 800l/min

- compact design, thus little space required
- no electricity required
- no CFCs
- low installation costs
- no welded parts
- low pressure drops
- no condensate drain
- no maintenance required

Efficient terminal station dryers ZANDER MIN DRY Series MDK

- pressure dew point -40°C
- constantly monitored by means of a visual indicator
- no energy consumption
- capacity from 29 m³ to 105 m³
- connection 1/2"

Typical applications:
- instrumentation, gas analysing devices, pneumatic controls
- protection of cylinders
- aeration of containers