|
|
| 4/2 & 4/3 Valve |
|
 |
|
|
 |
316 Stainless Steel Construction |
|
Spring offset & spring center functions |
|
Solenoid Operated |
|
EExia, EExme |
|
EExd, EExde UL, ATEX |
|
Hydraulic and Pneumatic Signals |
|
Flowrates up to 200 L/min. |
|
Pressures up to 400 Barg |
|
For voltages & power consumptions |
|
Port Sizes 1/4", 3/8", 1/2" & 3/4" NPT |
|
 |
|
|
|
|
|
|
|
| Pulse Operated Hydraulically Latched |
|
|
|
|
|
316 Stainless Steel Construction |
|
Solenoid Operated |
|
EExia IIB/IIC T4/T6 |
|
EExme II T4/T6 |
|
Zone o and Zone 1 |
|
P.T.B./Baseefa/Cenelec/UL, ATEX |
|
Flowrates up to 200 L/min. |
|
Pressures up to 710 Barg |
|
Block before bleed |
|
Failsafe on loss of hydraulic supply pressure |
|
Designed to IP66 |
|
Voltages: 12 & 24V DC. |
|
Power Consumption: <1 Watt |
|
Power Consumption: 3.5 Watts on EExme Type |
|
Cable Connection: Plug & lead |
|
Cable Connection: M20 x 1.5 on EExme Type |
|
Port size: 3/8", 1/2" & 3/4" NPT |
|
 |
|
|
|
|
|
|
| |
| Subsea Valve |
|
|
|
|
|
316 Stainless Steel Construction |
|
Operating Pressures up to 690 Barg |
|
Water depths 2,000 meters |
|
Zero Leakage |
|
Compatible with low viscosity fluids |
|
Single and dual coil types: 24V DC, 15 Watts |
|
3-port, 2-position spring return & bi-stable |
|
Flow rates: up to 30 L/min. |
|
Manifold mounting interface |
|
Port Sizes: 5mm & 10mm orifices |
|
 |
|
|
|
|
|
|
|
| Cylinders |
|
|
|
|
- Valve Actuation - Railway Industry- Underground- Hopper Wagons
- Water Treatment Corrosive Environment Heating and Ventilating Process Industry
- Pharmaceutical
Construction Materials
- Aluminum Steel
- 304 / 316 Stainless Steel
|
 |
|
|
|
|
|
|
|
| Impact 2000 |
|
|
|
|
IMPACT 2000™ is a high integrity modular pneumatic actuator control assembly in 316 Stainless Steel. Lighter, stronger and more compact than panel mounting. IMPACT 2000™ offers a significant reduction in total installed cost in both CAPEX and OPEX over panel mounted assemblies.
The modular system does away with complex arrangements using panels, pipes and additional fittings. Using a range of field proven components, valves, spool, poppet or direct acting, and filter regulators are connected in series using a universally compatible interface block and mounted directly onto the valve actuator. |
 |
|
|
Each unit is supplied assembled and tested, ready to fit and operate. No design work is required from the contractor and all components are kept in stock , resulting in short lead times. IMPACT 2000™ components are ideal for both hazardous area and industrial use, with ATEX, NEMA, UL and CSA approvals. Units will interface with all global pneumatic actuators.
Midland-ACS have been manufacturers of stainless steel and brass pneumatic components for over forty years, that wealth of experience has resulted in a range of field proven specialist products renowned for their performance and reliability. |
| Operating Fluids |
 |
|
| |
|
|
|
|
| Valves |
|
|
|
|
| Midland-ACS uses their expertise in the principles of Spool, Poppet or Slide Valve design to meet a wide variety of requirements particularly 316 Stainless Steel special valves for operations up to 50 bar to handle Air / Oil and aggressive media in harsh environments and numerous mounting configurations |
 |
|
|
|
|
| |
|
|
| Control Panels |
|
|
|
|
| Midland-ACS has a wealth of expertise in the design and build of control panels for all types of application, including door control, valve actuator control and emergency shut down systems. |
 |
|
|
|
|
|
| Back to Top |
|
